The problem
Most of what a building's frame costs is concrete and rebar, and most beams are poured as plain rectangles. That is not because rectangles are efficient. A beam only needs depth where it bends most, and everywhere else the concrete is dead weight. Shaped beams that put material only where the bending is have been known for decades, but their moulds had to be 3D printed or milled, which cost more than the material saved. So estimators price the rectangle and the waste stays in the building.
Why now
MIT researchers have cast a 3 m beam in a sewn fabric mould, using roughly a third of the concrete and half the steel of a conventional beam for the same load, with measured behaviour close to the model (MIT News, November 2026). Fabric needs no special equipment, so the shape is no longer the expensive part. Meanwhile embodied-carbon rules, such as the EU's carbon border charge on imported cement and green-building codes in Singapore and India, are turning each saved cubic metre into money.
What it is
The company sells engineered fabric-formwork patterns and the design software behind them. This demo is the first product: an estimator drags a load onto a beam, sets the span and supports, and sees the shaped beam beside a plain rectangle of the same capacity, with concrete, rebar, carbon and cost compared, and a flat cut-and-sew pattern. The depth rule is a deliberately simple bending-only simplification. The full product adds shear, deflection, code checks, certified designs, real patterns and the cloth itself.
Who it's for
Cost estimators and structural engineers at contractors and precast yards who price concrete jobs by the cubic metre and are already pressed on carbon. It is not for architects who want sculptural concrete for its looks, and not for anyone expecting a stamped design: the demo checks bending only and says so. It is also not for homeowners, who cannot specify or certify a structural member.
How it makes money
Customers pay per project, or per tonne of material saved, for the patterns and the verified design behind them, and later for fabric kits supplied directly. Per-saving pricing aligns us with the estimator's budget: when the beam saves nothing, we earn nothing. We do not charge a seat licence yet, because a software fee before trust in the saving would slow the first projects. Formwork incumbents rent rigid systems and earn from reuse, so a disposable job-specific mould sits outside their model, and they are the natural acquirer.
Go to market
Start with precast yards and mid-size contractors in two fast-building markets with carbon rules already biting, such as Singapore and India. Offer free beam comparisons on live tenders: an estimator who sees a third less concrete on their own span forwards it to their engineer within the hour. Win one engineer's stamp on a repeatable simple-span beam, publish that design as a certified pattern, and let each approval in a local code become a reason the next yard adopts it.